It can be a pretty frustrating situation. You go to turn on your Panasonic air conditioner or are waiting for it to turn with a timer, only to see a blinking orange light.
Sometimes this blinking light means the unit won’t turn on at all. Other times it just means the timer is set and you need to cancel it to allow the AC unit to start.
Below we’ll look at what can cause your Panasonic air conditioner timer to blink and how to easily get rid of it.
Why is the Panasonic air conditioner timer blinking?
There are a few reasons your Panasonic air conditioner is blinking.
The first is that the unit requires maintenance. This could be something simple like needing to replace an air filter. It can also be a more serious fault that is causing the blinking.
Make sure to check the simple things first, this includes the air filter and that the unit is installed correctly.
Sometimes the air conditioner just encountered a minor fault and can resume operation once the error message is cleared. For starters, you can try powering off the air conditioner.
You can also try shutting off the main power at the breaker box. Cut the power for at least 1 minute then try restarting the unit to see if the blinking light has cleared.
Clear the blinking light on your Panasonic air conditioner
If cycling the power on and off did not clear the blinking light, there is another method you can try that involves the remote control.
Every model may be a little different, but most models will have these same buttons.
1. Press in the Check button on the remote for at least 5 seconds
There is a small hole on the remote labeled “Check”. Use a small instrument like a toothpick to depress this button and hold it for 5 seconds. You will hear a beep sound, then let go.
2. Press the RC button for 5 seconds
There is another small button labeled “RC” on the same row as the check button. Depress this button the same way you did in the previous step. Hold this for 5 seconds.
3. Press the power on/off button
Then press the on/off button on the remote to complete the process. The air conditioner should now show normal lights and will resume normal function without the blinking light.
Just remember that this fix may just be temporary. This method clears out the error code and allows the air conditioner to be used again. During this process the remote control will display an error code.
If you want, you can make a note of this error code for later should you need to contact a service technician regarding a repair.
If there is still a problem with the air conditioner after the reset, the flashing timer light may return and you’ll have to perform this action again. If it keeps happening over and over, the unit may require service if you’ve tried other options.
Panasonic Air Conditioner Timer Blinking FAQ
Why is my Panasonic AC blinking orange?
If you don’t have a timer set or you’ve tried to reset the timer or turn off the timer, this usually means that a fault was detected.
Try resetting the power by either unplugging the unit or cutting power at the fuse box for at least 15 seconds. Then try turning on the AC unit.
If that doesn’t work, follow the steps above to try to clear the fault manually.
How do I reset my Panasonic Aircon timer?
If you need to reset the timer blinking on your Panasonic air conditioner, you will need the remote control. Hold the Check button down for 5 seconds until you hear a beep.
Then hold the RC button for 5 more seconds. Finally, press the power button at the top of the remote control. That should reset the entire air conditioner along with the timer light.
Why is my air conditioner blinking?
A blinking light on an air conditioner means the system detected an error or maintenance is required.
If your unit has an air filter, check it to see that it is clean and functioning properly. Sometimes just opening the air filter door and checking it will reset the light.
However, if the filter is dirty, make sure to change it according to the instructions in the manual that came with the unit.
If that doesn’t work, you can try powering off the unit and powering it back on. Finally, try resetting the error code via the remote control if the above methods did not fix the problem.
Panasonic blinking timer error code
The blinking orange light is an indication of an error code. If you go through the process of resetting the error code explained in this article, the remote control will display the error code on the screen.
You can then reference the Panasonic manual or website to find the exact nature of the error code.
Most of these error codes are minor and once cleared the unit can be powered back on and resume normal function. However, more serious faults may not be cleared and the unit will most likely require professional service.
Final Thoughts On Panasonic Air Conditioner Timer Blinking
While having that flashing orange light when you just want to feel cool air coming out can be frustrating, it’s often a pretty easy fix once you know what to do.
Follow the steps in this guide and you should be able to clear most minor errors with your Panasonic air conditioner in no time.